pic

Dr. Y. M. Shashidhara

Professor and Head of the Department

B.E.,M.Tech., Ph.D.

0

B.E.,M.Tech., Ph.D.

Professor and Head of the Department

·            Performance of a bio-gas run dual fuel C.I engine, National Conference on New Energy Technologies and clean Environment, 1993, Osmania University, HYDERABAD, 

·            Bio-gas for Irrigation and Energy Conservation, National Solar Energy Convention  Anna University, 1997, CHENNAI.

·          Vegetable oils for direct injection diesel engine operation, National Symposium on Recent advances in Renewable Energy Technologies, 2002, ShivajiUniversity, KHOLAPUR.

·            Experimental investigation with Ethanol-gasoline blends for a four stroke Copper coated S.I Engine Operation, National Conference on recent trends in Automobile Technology and its future prospects, 2006 Bharathidasan University, THIRUCHIRAPALLI.

·            A Smart System for Online mileage indication in Automobile, National conference on Recent advances in Process Control and Instrumentation Engineering, 2006, KurukshetraUniversity, KURUKSHRETRA.

·            Development of Biofuels in the Indian Context-A Review, National Conference on Biofuels for Internal Combustion Engines: Prospective and Prospects, 2006, NITK, SURATHKAL.

·            Experiment Investigations on a Ceramic coated C.I dual fuel Engine using bio gas as secondary fuel- National Conference on Advances in Energy Research Vision-2015 4-5 Dec. 2006 Indian Institute of Technology Bombay, MUMBAI.

·            An Electronic Security System for New Generation Automobiles, 12th Annual Conference of Vignanaparishad of India & National Symposium on Applications of Special functions,25-27 Oct.2007, Jainarainvyas University, JODHPUR.

·            A low cost RFID based security system for Automotive cars, National Conference     on Recent Developments in Mechanical Engineering-09, 5-6 Feb. 2009, Sri Chitra College of Engineering &Technology, TRIVANDRAM.

·           Evaluation of Cutting Forces and Surface Roughness on turning AA 6061 using  Vegetable oils as Cutting Fluid, National Tribology Conference , 8-10 Dec. 2011, IIT, ROORKEE.

·            Experimental determination of profile thickness variation and stress distribution pattern  of deep drawn AA 6061 cups with vegetable oils as lubricant, National Tribology Conference, 8-10 Dec. 2011, IIT, ROORKEE.

·            Experimental Investigation of Epoxidised Pongam Methyl Ester as Lubricant for Four Stroke Spark Ignition Engine Operation, National Tribology Conference, 13-15 Dec. 2014, PES University, BANGALORE.

·            Statistical and Regression Analysis of Cutting Force and Surface Roughness under Vegetable Based Cutting Fluids on Turning AISI 304L, National Tribology Conference, 13-15 Dec. 2014, PES University, BANGALORE.

·            Experimental investigations on four stroke   Silver - Copper coated S.I.Engine under ethanol-gasoline blends of operation, National Conference on Technologies for Green Mobility,10-11 March 2017,Bannari Amman Institute of Technology, SATHYAMANGALAM.

·            Studies on a four stroke Spark Ignition Engine under additive reformulated lubricants, NCAMREC-18, 18-19 June, 2018. KVG College of Engineering, SULIYA (South Canara).

·            Experimental study  on performance and emission characteristics of four stroke gasoline engine under formulated coconut oil as base lubricant, National Conference on Emerging trends in Mechanical Engineering for UG/PG students and Research scholars,26th June 2019, Ramaiah Institure of Technology, BANGALORE.

·            Experimental  investigations on four stroke spark ignition engine using waste plastic fuel, National Conference on Emerging trends in Mechanical Engineering for UG/PG students and Research scholars, 26th June 2019,Ramaiah Institute of Technology, BANGALORE.

Interational Conference

·          Bio-diesel oils for C.I Engine operation and Energy Conservation, International Conference on Energy and Environment Technologies for Sustainable Development,2003,Malavia National Institute of Technology, JAIPUR.

·          Ethanol for Copper Coated four stroke S.I Engine Operation and Sustainable Development, International Congress on Renewable Energy, 2006, Osmania University,HYDERABAD.

·          A Four Stroke S.I Engine Modification: A Comparative study, International Conference on Bio vision-2015, 13-17 Oct. 2006, Engineering College Bikaner, BIKANER.

·          Bio Fuels for Direct Injection diesel engine Operation and Energy Conservation, International   Conference on Bio Vision-2015, 13-17 Oct. 2006,Engineering College Bikaner, BIKANER.

·          Vegetable Oil Based Lubricants for Industrial Applications - A Review- International Conference on Industrial Tribology-06, 30th Nov.- 2nd Dec. 2006,Indian Institute of Science, BANGALORE .

·          An Intelligent Online Mileage Indicator for New generation Automobiles, IEEE International Conference on Industrial Technology, 15-17 Dec. 2006, Indian Institute of Technology Bombay, MUMBAI.

·          Sunflower Waste Frying Oil as an Alternative Fuel for D.I diesel engine operation, International  Symposium on Organic forming & Renewable Sources of Energy for Sustainable Development, 19 -21 Nov.  2007, Maharanaprathap University of Agriculture &Technology, UDAIPUR.

·           4S Copper Coated S.I Engine for Ethanol Operation and Energy  Conservation,1st International Conference on  Advances in Energy Research, 12-14 Dec. 2007, Indian Institute of Technology Bombay, MUMBAI.

·          Diesel engine Performance and Emission evaluation under various Vegetable oil Modes, 1st International Conference on Advances in Energy Research, 12-14 Dec.2007, Indian Institute of Technology Bombay, MUMBAI.

·          Vegetable oils as a potential cutting fluid – Evolution ,International Conference on Advances Tribology, 3-5 Dec.2008,  National University of Singapore, SINGAPORE.

·          Studies on Cup Profile Thickness variation of Deep Drawn 304L Sheets usingGreen Lubricants, 7th International Conference on  Industrial Tribology, 2-4  Dec.  2010, SAIL,  RANCHI.

·          Deep drawn Cup Profile thickness Studies on 304L Steel Sheet using Vegetable Oils as Lubricant, International Tribology  Conference (ASIATRIB2010), 5-9 Dec. 2010, PERTH, AUSTRALIA.

·          Tribotests on AA6061 and AISI 1040 with Vegetable oils as Lubricants, International Tribology Conference (ASIATRIB2010), 5-9 Dec. 2010, PERTH, AUSTRALIA.

·          Friction and Wear Tests on AA6061 and AISI 1040 with Green Lubricants – Pongammiapinnataand Jatrophacurcass, STLE 2011 Annual Meeting and Exhibition, 15-19 May 2011, ATLANTA, USA.

·          Comparative Study of Formability of 304 L Steel Sheets With Green Lubricants-Theory and experiments, STLE 2011 Annual Meeting and Exhibition, 15-19 May 2011, ATLANTA, USA.

·          Stability and Tribological  studies on environmental friendly Vegetable based oils, 8th International Conference on Industrial Tribology, 7-9 Dec. 2012, Westin,TSI, PUNE.

·          Evaluation of Deep drawing of AA 5083 sheets using Green lubricants –Pongammiapinnata and JatrophaCurcass,  8th International Conference on Industrial Tribology, 7-9 Dec. 2012, Westin,TSI, PUNE.

·          Studies on Performance and Emission of Ceramic Coated C.I. Engine  under various blends of Pongam and Jatropha bio-diesels, International Conference on Advances in Mechanical Engineering Science 21- 22, April, 2017, PESCE, MANDYA.

·          Studies on a four stroke Spark Ignition Engine under formulated Vegetable oils mode of  lubrication,9th International Conference on Industrial Tribology, organized by Tribology Society of India, 6-9 Dec.2017, KOLKATA.

·          Vegetable oils as an alternative to Mineral oil in Automotive Lubrication - A Review, 9th International Conference on Industrial Tribology, organized by Tribology Society of India, 6-9 Dec.2017, KOLKATA.

·          Evolution of Vegetable oil as Potential Cutting Fluid for Machining,9th International Conference on Industrial Tribology, organized by Tribology Society of India, 6-9 Dec.2017, KOLKATA.

·          Experimental investigations on the Performance and Emission characteristics of diesel engine under different biodiesels for various compression ratios, 6th International Conference on Advances in Energy Research held during 12-14, Dec. 2017. Indian Institute of Technology Bombay, MUMBAI.

National Journal

Data not found !!

International Journal

·       Vegetable oils as a potential cutting fluid – an Evolution ,Tribology International, Vol.43, pp.1073-1081, 2010.

·       Tribological studies on AISI 1040 with raw and modified versions of Pongam and Jatropha vegetable oils as lubricants , Advances in Tribology, Vol.2012, article ID 560175.

·       Experimental determination of cutting power for turning and material removal rate for  drilling of AA 6061-T6 using vegetable oils as cutting fluid , Advances in Tribology, Vol.2013, Article ID 362931.

·       Deep drawing of 304L Sheets using Vegetable oils as Forming Lubricants,International  Journal of Advancements in Research and Technology,Vol.1,2013.

·       Studies on Cup Profile Thickness variation of Deep Drawn  AA 6061 Sheet using Green  Lubricants,           Indian Journal of Tribology, Vol. 7, No,1, pp1-5, 2015.

·       Experimental Studies on Turning of AISI 316L Using Modified Neem oil as Straight Cutting oil, International Journal of Scientific & Engineering Research Volume 9, Issue 7, July-2018,ISSN 2229-5518  

  • Secured Sixth rank in Engineering degree, 1993, University of Mysore, Mysore.
  • Best Project Award, for the project Comparative study of Performance and Emission characteristics of four stroke S.I. engine under various bio lubricants,2017, instituted by Karnataka State Council for Science and Technology, IISc, Bangaluru.

 

  • Co-Investigator, Visvesvaraya Technological University funded Research Project, "Evaluation of Vegetable oils as a potential alternative for Metal forming Lubricant” , 2010-12.
  • Coordinator, International Conference on Green Trends in Mechanical Engineering Sciences, 3-5,Oct.2018. Malnad College of Engineering, HASSAN.
  • Coordinator/organizer of many technical workshops/events

 

Non Conventional Energy, Tribology

Contact

PO's and PSO's  
 
 
 
 
 
Building

.

 

Name of Research Supervisor

Name of Research Scholar

Year of Registration

Current status

Dr. Y.M. Shashidhara

Girish. A.R.

19/05/2019

Completed course work

Nishchitha. K.M

07/09/2017

Completed course work

Jerome Anthony

06/02/2017

Completed course work

Natesh C.P

21/11/2015

Completed Comprehensive Exam  

 

Malnad College of Engineering