Publication

DEPARTMENT OF MECHANICAL ENGINEERING

Details of research publications by the department staff

 

ABSTRACT

 

S. No.

Name of the Staff

Journal

Conference

Total

National

Inter National

National

Inter National

        1.        

Dr.S.R.Jayaram               

02

06

11

20

39

        2.        

Dr.S.Mohan Kumar         

05

15

21

14

55

        3.        

V.V.Bongale                  

-

06

05

01

12

        4.        

Dr. C.V.Venkatesh               

-

03

03

04

10

        5.        

S N Ravi Shankar

-

01

-

02

03

        6.        

L.Laxmana Naik

-

04

-

-

04

        7.        

Hareesha M.

-

01

-

-

01

        8.        

Sree Rajendra

01

07

07

05

20

        9.        

Dr. M.S.Srinath

02

07

06

18

33

    10.        

Dr. B.Yogesha                     

-

18

02

12

32

    11.        

Dr.K.A.Venugopal           

-

05

03

03

11

    12.        

Dr.H.V.Ramakrishna       

-

04

06

03

13

    13.        

G.C.Gopalakrishna

-

01

-

-

01

    14.        

S.L.Dinesh           

-

-

02

02

04

    15.        

Dr. S.Pradeep

-

04

01

02

07

    16.        

Dr. Amarendra H.J

-

04

03

04

11

    17.        

K. R. Dushyanthkumar                   

-

05

03

08

16

    18.        

Vijaya kumar G Tile

-

01

-

02

03

    19.        

M.G.Vasundhara.

-

03

02

05

10

    20.           

B. S. Shivashankara

-

02

-

-

02

    21.        

Raghavendra Rao R.

-

-

-

02

02

    22.        

Jeevan  T.P

-

02

02

-

04

    23.        

Sharath H. K.

-

01

-

-

01

Total:­-

295

 

 


 

Dr.S.R.Jayaram

National Journal

1.    Dr.S.R.Jayaram, “Severity of misalignment of rotor bearing system”,  Journal of Association of Engineers (India), 1988

2.    Dr.S.R.Jayaram, “Terro technology – A case study”, Journal of Association of Engineers (India), 1988.

International Journal

1.      Dr.S.R.Jayaram, “Thermal and elastic effects on the performance of TPJB – A Theoretical study”, Journal of Physics, Applied Physics, U.K.25, 1992, pp. 373-378.

2.      Dr.S.R.Jayaram, “Design and analysis of TPJB using FEM, Advances in Industrial Engineering”, Quality through Engineering Design, Elsevier Publication, 1993. pp. 71-382.

3.      Dr.S.R.Jayaram,  “Vegetable oils as a potential cutting fluid – an Evolution”, Tribology International,2010, pp. 1073-1081

4.      Dr.S.R.Jayaram, “Tribological studies on AISI 1040 with raw and modified versions of Pongam and Jatropha vegetable oils as lubricants”, Advances in Tribology Vol.2012, Article ID 560175.

5.      Dr.S.R.Jayaram, “Deep drawing of 304 L Steel Sheet using Vegetable oils as Forming Lubricants”, International Journal of Advancements in Research & Technology. Vol.1:7,2012, ISSN 2278-7763.

6.      Dr.S.R.Jayaram, “Experimental determination of cutting power for turning and material removal rate for   drilling of AA 6061-T6 using vegetable oils as cutting fluid” Advances in Tribology Vol.2013, Article ID 362931.

National Conference

1.         Dr.S.R.Jayaram, “Design and fabrication of test rig for ball bearing”, Conference on antifriction bearings, Bangalore 1986.

2.         Dr.S.R.Jayaram, “Orbital analysis –A tool for condition based maintenance”, All India seminar on maintenance management, Bhopal, 1988.

3.         Dr.S.R.Jayaram, “Bearing geometry – A critical parameter in the –performance of hydrodynamically lubricated sleeve bearings”, 16th National conference on fluid mechanics and fluid power, Kanpur, 1988.

4.         Dr.S.R.Jayaram, “Steady state and dynamic characteristics of Tilting pad journal bearings”, 9th National conference of Industrial Tribology, CMTI, Bangalore, 1990.

5.         Dr.S.R.Jayaram, “Experimental investigation of a rotor mounted on TPJB”, 10th National Conference on Industrial Tribology, Dehradun, 1992.

6.         Dr.S.R.Jayaram, “Design of reclamation device for used oils – XI National Convention of mechanical Engineers –MACT, Bhopal, 1995.

7.         Dr.S.R.Jayaram, “Campus recruitment: A system approach”, State level Training & Placement Officers meet, GIT, Belgaum, 2003.

8.         Dr.S.R.Jayaram, “Study of Coast Down Phenomenon using Energy Concepts – National Symposium on Acoustics-97”, Vishakapatnam.

9.         Dr.S.R.Jayaram, “Development of Biofuels in the Indian Context-A Review”, National Conference on Biofuels for IC Engines: Prospective and Prospects, NITK, Surathkal – 2006.

 10.  Dr.S.R.Jayaram, “Evaluation of Cutting Forces and Surface Roughness on turning AA 6061 using Vegetable oils as Cutting Fluid”, NTC-2011, 8-10, Dec. 2011, IIT, Roorkee.

 11.Dr.S.R.Jayaram, “Experimental determination of profile thickness variation and stress distribution pattern of deep drawn AA 6061 cups with vegetable oils as lubricant”, NTC -2011, 8-10, Dec. 2011, IIT, Roorkee.

International Conference

1.      Dr.S.R.Jayaram,  “THD solution of TPJB, International conference Frontiers of Tribology”, Stratford-upon-Avon, U.K., 1991

2.      Dr.S.R.Jayaram,  “Monitoring of high speed machinery supported on TPJB”, European Tribology Conference, Budapest, 1993

3.      Dr.S.R.Jayaram,  “Two dimensional analysis of TPJB using FEM”, International conference on computational methods in Engineering, Shiraz, Iran, 1993

4.      Dr.S.R.Jayaram,  “Re-refining of used oil – Case studies”, International Conference on Industrial Tribology, Tata steel, Jamshedpur, 2001

5        Dr.S.R.Jayaram,  “Determination of System Damping - A New Approach”, IPROMM, 2005

6        Dr.S.R.Jayaram, “Experimental Investigation on Effect of Blending of  MoS2 and Graphite with Nylon-6/6”, JNTU, Hyderabad.

7.      Dr.S.R.Jayaram, “Evaluation of System Damping Using Run Down Time for Rotors Mounted on Fluid Film Bearings - A New Technique”, 59th STLE Conference, Toranto, Canada, 2004.

8.      Dr.S.R.Jayaram,  “Investigation of Mechanical Properties of Nylon 66 and MoS2 blends”,   ICIT,  Indian Institute of Science, Bangalore – 2006  

9.      Dr.S.R.Jayaram, “Comparative Study of Run Down Behaviour of Rotors”, ICIT, Indian Institute of Science, Bangalore – 2006.

10.   Dr.S.R.Jayaram,   “Lubrication Management”, A New Approach ICIT,  Indian Institute of Science, Bangalore – 2006.

11.     Dr.S.R.Jayaram, “Vegetable oil based lubricants for Industrial Applications - A review”, ICIT,  Indian Institute of Science, Bangalore – 2006.

12.     Dr.S.R.Jayaram, “Diesel engine Performance and Emission evaluation under various Vegetable oil Modes”, 1st International Conference on Advances in Energy Research, Indian Institute of Technology, Mumbai - 2007.

13.     Dr.S.R.Jayaram,  “Studies on Cup Profile Thickness variation of Deep Drawn 304L Sheets using Green Lubricants”, 7th International Conference on Industrial Tribology, 2-4 December 2010, SAIL, Ranchi, India.

14.     Dr.S.R.Jayaram, “Deep drawn Cup Profile thickness Studies on 304L Steel Sheet using Vegetable Oils as Lubricant”, International Tribology Conference (ASIATRIB2010), 5-9      December 2010, Perth, Australia.

15.     Dr.S.R.Jayaram, “Tribotests on AA6061 and AISI 1040 with Vegetable oils as Lubricants”, International Tribology Conference (ASIATRIB2010), 5-9    December 2010, Perth, Australia.

16.     Dr.S.R.Jayaram, “Friction and Wear Tests on AA6061 and AISI 1040 with Green Lubricants – Pongammia pinnata and Jatropha carcass”, STLE 2011 Annual Meeting and Exhibition, May 15-19, 2011, Atlanta, USA.

17.     Dr.S.R.Jayaram, “Comparative Study of Formability of 304 L Steel Sheets With Green Lubricants - Theory and experiments”, STLE 2011 Annual Meeting and Exhibition, May 15-19, 2011, Atlanta, USA.

18.     Dr.S.R.Jayaram, “Study of Wear Behavior of Nylon 66 Blended with Graphite and MoS2 using Taguchi’s Technique”, STLE 2011 Annual Meeting and Exhibition, May 15-19, 2011, Atlanta, USA.

19.     Dr.S.R.Jayaram, “Stability and Tribological studies on environmental friendly Vegetable based oils”, 8th International Conference on Industrial Tribology-2012, PUNE.

20.     Dr.S.R.Jayaram, “Evaluation of deep drawn AA 5083 sheets using Green lubricants – Pongammia pinnata and Jatropha carcass”, 8th International Conference on Industrial Tribology-2012, PUNE.

 

Dr.S.Mohan Kumar

National Journal Papers

1.      Mohan Kumar,S., “Tracer / Coupler Mechanism’’,  Proc. of the  28th  ISTAM Society, Andhra University, Waltair, Dec. 83, pp. 49-57.

2.      Mohan Kumar,S., Dhande, S.G. and Muju, M.K.,“ Computer Aided Design of Work dependent Cams for Single Spindle Automatic Machines’’, Proc. Of the 2007 AMM, V.J.T.I., Bombay, pp. 15-21.

3.      Mohan Kumar,S.,“ Egg Packaging Problem’’, Proc. of the  33rd ISTAM Society, B.H.U., Varanasi, Dec.1988.

4.      Mohan Kumar, S.,“ Design of water taps to prevent complete leakage’’, at 4th Indian Engineering Congress, Jl. of the Institution of Engineers (India), pp. 20-21, Vol. No. 39, March 1990, held at Bhuvaneswar, during Jan. 1990.

5.      Mohan Kumar,S.,“ Egg Package Problem’’, Proc. of the 38rd ISTAM Society, I.I.T.Kharagpur, 9-12, Dec. 1993.

International Journal Papers

1.            Mohan Kumar.S., Dhande, S.G. and Muju, M.K., “Computer Aided Design of Work dependent Cams for Single Spindle Automats’’, Special issue of Intl. Jl. Of Mechanism and Machine Theory, Pergamon Press Plc., U.K., Vol. 24, No: 6, pp.463-471, 1989.

2.            Mohan Kumar, S., Karmakar, R. and Mukherjee, A., “Force Control through Passive Dissipative Foundation’’, Proc. Of  Intl. Jl. on Automation (ICAUTO-95), Indore, India, Allied Publishers Ltd., Dec. 1995, pp. 689-692.

3.            Mohan Kumar, S., Karmakar, R. and Mukherjee, A., “Upper and Lower limit force control through virtual dissipative foundation’’, Proc. of Intl. Jl. on Advances in Mechanical Engg., ( ICAME-95), Indian Institute of Science, Bangalore, India, Narosa Publishing House., New Delhi, Dec. 1995, pp.297- 309.

4.            Dr. S. Mohan Kumar,“A Novel way to Transient Damping using Virtual Dissipative Degrees of Freedom”, Proc. of the Intl. Jl. of Machine Design and Industry Automation (ICAMDIA-2007) at COEP, Pune, January 10-12th 2007, pp 30-34, AMD, Tata McGRAW- Hill Publishing Company Limited, New Delhi.

5.            Arunkumar Y. &  Dr. S. Mohan Kumar,  “CAD Neutral formats and their role in Virtual Manufacturing”, ”, Proc. Of the Intl. Jl. of Machine Design and Industry Automation (ICAMDIA-2007) at COEP, Pune, January 10-12th 2007, pp 530-536, AMD,  Tata McGRAW- Hill Publishing Company Limited, New Delhi.

6.            Arunkumar Y. &  Dr. S. Mohan Kumar,  “Tools and Strategies for Virtual Cellular Manufacturing”,  Proc. of the Intl. Jl. of Machine Design and Industry Automation (ICAMDIA-2007) at COEP, Pune, January 10-12th 2007, pp 417-423, AMD,  Tata McGRAW- Hill Publishing Company Limited, New Delhi.

7.            Dayananda Gowda, Dr. S. Mohan Kumar& Mr. K.V. Balasubramanya, “Implementation of Distributed Control Systems for the Automation of Pulp and Paper Industry”, Proc. of the Intl. Jl. of Machine Design and Industry Automation (ICAMDIA-2007) at COEP, Pune, January 10-12th 2007, pp 281-286, IA,  Tata McGRAW- Hill Publishing Company Limited, New Delhi.

8.            Roshan Dutt , Dr. S. Mohan Kumar & Mr. S.N. Satyanarayana, “Computational Technique for the Determination of Satellite Thruster Plume Flow Characteristics”, Proc. of the ”, Proc. of the Intl. Jl. of Machine Design and Industry Automation (ICAMDIA-2007) at COEP, Pune, January 10-12th 2007, pp 475-478, AMD,  Tata McGRAW- Hill Publishing Company Limited, New Delhi.

9.            Raju.B.S & Dr. S. Mohan Kumar, “E-Manufacturing of One-Off Intricate Castings using Rapid Prototyping Technology”, Proc. of the Intl. Jl. of Machine Design and Industry Automation (ICAMDIA-2007) at COEP, Pune, January 10-12th 2007, pp 373-378, IA,  Tata McGRAW- Hill Publishing Company Limited, New Delhi.

10.            Arunkumar Y. & Dr. S. Mohan Kumar,  “CAD Neutral formats for Virtual Manufacturing”, Proc. of the 11th NAFEMS World Congress 2007 , Vancouver, Canada during 22nd to 25th May, 2007. pp 79-81.

11.            Dr. S. Mohan Kumar, Roshan Dutt , & Mr. S.N. Satyanarayana,  “Simulation of the Satellite Thruster Exhaust Plume Characteristics based on Fox Model and Mayer Model – A Comparative Study”, Proc. of the 11th NAFEMS World Congress 2007 to be held at Vancouver, Canada during 22nd to 25th May, 2007., pp 172-175.

12.            Manjunath K., Mohan Kumar, S.&  Sundar Nadimpalli, “Virtual Protyping Technology – An Aided Design for Product Development”, Proc. of the TeamTech-2008-Intl. Conference & Exhibition on Total Engineering Analysis & Manufacturing Technologies held at J. N. Tata Auditorium, I.I.Sc., Bangalore, India  during 22nd to 24th Sept., 2008. pp.38

13.            Mohan Kumar, S. &  Madhu Kumar I.M., “Case Studies on Virtual Protyping of Plant and Manufacturing Processes”, Proc. of the TeamTech-2008-Intl. Conference & Exhibition on Total Engineering Analysis & Manufacturing Technologies held at J. N. Tata Auditorium, I.I.Sc., Bangalore, India  during 22nd  to 24th Sept., 2008., pp.73

14.            Mohan Kumar, S.&  Krishna Rajendra Neeli, “VR Environment for Ergonomics”, Proc. of the TeamTech-2008-Intl. Conference & Exhibition on Total Engineering Analysis & Manufacturing Technologies held at J. N. Tata Auditorium, I.I.Sc., Bangalore, India  during 22nd   to 24th Sept., 2008., pp.118

15.            Mohan Kumar, S.&  Shashikiran H,K. and Arun Kumar Y., “Design and Development of a Three Phase Multifunction Micro Controller Based Energy Meter”, Proc. of the TeamTech-2008-Intl. Conference & Exhibition on Total Engineering Analysis & Manufacturing Technologies held at J. N. Tata Auditorium, I.I.Sc., Bangalore, India  during 22nd  to 24th Sept., 2008, pp.136

 

National conferences

1.            Mohan Kumar, S. and Sharath, S. “Design and Development of a Computer Controlled Dual Purpose Mobile Robot”, AICTE sponsored National conference on Advances in Mechanical Engineering ( NAME-2004) held during 12-14, February 2004 at JNN College of Engineering, Shimoga.

2.            Mohan Kumar, S. and Roshan Dutt “The Use of Artificial Intelligence in a Computer Integrated Manufacturing Environment”, AICTE sponsored National conference on Mechanical Engineering (NATCON.ME-2005) held at Ghousia College of Engineering, Ramanagaram during 11th –12th March 2005, pp 266-272.

3.            Mohan Kumar, S. and Gowda, Dayananda A. “Application of Distributed Control System to Process Industries, National Conference on Recent Advances in Mechanical Engineering (README’05) held during 1st –3rd December, 2005 at P.A. College of Engineering, Mangalore-574153, Karnataka, pp.78.

4.            Mohan Kumar, S. and Dutt, Roshan. “The Application of Virtual Reality in Computer Integrated Manufacturing”, National Conference on Recent Advances in Mechanical Engineering (README’05) held during 1st –3rd December, 2005 at P.A. College of Engineering, Mangalore-574153, Karnataka, pp.79.

5.            Mohan Kumar, S. and Gowda, Dayananda A. “Reconfigurable Manufacturing Systems: A Tool for Flexible Automation”, National Conference under TEQIP on Emerging Trends in Mechanical Engineering (ETIME-2006) held during 10th –11th February, 2006 at B.M.S. College of Engineering, Bangalore, Karnataka, pp.76.

6.            Mohan Kumar, S. and Gowda, Dayananda A. “Agile Assembly Architecture for Minifactories”, National Conference under TEQIP on Emerging Trends in Mechanical Engineering (ETIME-2006) held during 10th –11th February, 2006 at B.M.S. College of Engineering, Bangalore, Karnataka, pp.83.

7.            Mohan Kumar, S. and Dutt, Roshan. “The Role of Virtual Reality in Concurrent Engineering for Manufacturing”, National Conference under TEQIP on Emerging Trends in Mechanical Engineering (ETIME-2006) held during 10th –11th February, 2006 at B.M.S. College of Engineering, Bangalore, Karnataka, pp.84.

8.            Mohan Kumar, S., Suresh P.S. and Sanoop M.K., “Robotics for Improvised Explosive Devices” AICTE sponsored National conference on Mechanical Engineering (NATCON.ME-2006) held during 27th -28th  May, 2006 at Siddaganga Institute of Technology, Tumkur-572103, Karnataka, pp. 28.

9.            Mohan Kumar, S. and Rajashekar Patil, “Tools & Strategies for Collaborative Manufacturing” AICTE sponsored National conference on Mechanical Engineering (NATCON.ME-2006) held during 27th-28th May, 2006 at Siddaganga Institute of Technology, Tumkur-572103, Karnataka, pp. 105.

10.            Dutt, Roshan. and Mohan Kumar, S. “An Understanding of Exhaust plume Phenomenology using Gas Dynamics Principles” AICTE sponsored National conference on Mechanical Engineering (NATCON.ME-2006) held during 27th-28th May, 2006 at Siddaganga Institute of Technology, Tumkur-572103, Karnataka, pp. 23.

11.            Shivshankar B.S., Mohan Kumar, S. and Joseph Gonsalvis, “Kan ban- A Methodology of Material Handling” AICTE sponsored National conference on Mechanical Engineering (NATCON.ME-2006) held during 27th-28th May, 2006 at Siddaganga Institute of Technology, Tumkur-572103, Karnataka, pp. 24.

12.            Venugopal H.P., Mohan Kumar S. and Sree Rajendra, “Usage of VR Techniques for Motion Analysis” AICTE sponsored National conference on Mechanical Engineering (NATCON.ME-2006) held during 27th-28th May, 2006 at Siddaganga Institute of Technology, Tumkur-572103, Karnataka, pp. 21.

13.            Raghu B., Mohan Kumar S. and  Girish D.V. “Structural Optimization- A Key to Product Design”, AICTE sponsored National conference on Mechanical Engineering (NATCON.ME-2006) held during 27th-28th May, 2006 at Siddaganga Institute of Technology, Tumkur-572103, Karnataka, pp. 31.

14.            Shashikumar S., Mohan Kumar, S. and Joseph Gonsalvis, “Static Stress Analysis of Towing bar of a Heavily Loaded Chassis” AICTE sponsored National conference on Mechanical Engineering (NATCON.ME-2006) held during 27th-28th May, 2006 at Siddaganga Institute of Technology, Tumkur-572103, Karnataka, pp. 20.

15.            Srikanth M.s., Mohan Kumar S. and Ashok N. Badhe, “Overview of Automatic Pallet Changer in Machining Center”, AICTE sponsored National conference on Mechanical Engineering (NATCON.ME-2006) held during 27th-28th May, 2006 at Siddaganga Institute of Technology, Tumkur-572103, Karnataka, pp. 25.

16.            Madhu S., Sangharsh and Mohan Kumar S. “Study of Compensation Techniques for Thermal Stresses”, AICTE sponsored National conference on Mechanical Engineering (NATCON.ME-2006) held during 27th-28th May, 2006 at Siddaganga Institute of Technology, Tumkur-572103, Karnataka, pp. 26.

17.            Madhu B.V., Mohan Kumar S. and  Arunkunumar Y.“Assembly Line Balancing Problems: A Classification”, AICTE sponsored National conference on Mechanical Engineering (NATCON.ME-2006) held during 27th -28th  May, 2006 at Siddaganga Institute of Technology, Tumkur-572103, Karnataka, pp. 30.

18.            Rajkumar and Mohan Kumar, S. “Role of Electric Nut Runner in Engine Assembly Line” AICTE sponsored National conference on Mechanical Engineering (NATCON.ME-2006) held during 27th -28th May, 2006 at Siddaganga Institute of Technology, Tumkur-572103, Karnataka, pp. 27.

19.            Naresha, Mohan Kumar S. and Manjunath K. “Optimization and Design of a Pedestal for Communication RADAR” AICTE sponsored National conference on Mechanical Engineering (NATCON.ME-2006) held during 27th -28th  May, 2006 at Siddaganga Institute of Technology, Tumkur-572103, Karnataka, pp. 22.

20.            Sree Rajendra, Mohan Kumar S and Madhu.S,  “A concurrent engineering approach of component design for engine bleed   system and it’s thermal analysis in an virtual environment”, National Conference on emerging trends in Physics, Electronics and Engineering Sciences, JSS College, September 25-26, 2006.   Mysore, Karnataka

21.            Arunkumar Y. &  Dr. S. Mohan Kumar,  “An Overview of Cellular and Virtual Manufacturing”, National Conference on Recent Trends in Mechanical Engineering (TEQIP), Dept. of Mechanical Engineering, Jayachamarajendra College of Engineering, November 17-18, 2006, PS-12,pp.37 Mysore, Karnataka

Inter-National conferences

1.            Dr.S. Mohan Kumar,“A Novel way to Transient Damping using Virtual Dissipative Degrees of Freedom”, Intl. conference on Machine Design and Industry Automation (ICAMDIA-2007) at COEP, Pune, January 10-12th 2007, pp 30-34, MD, Tata McGRAW- Hill Publishing Company Limited, New Delhi.

2.            Arunkumar Y. &  Dr. S. Mohan Kumar,  “CAD Neutral formats and their role in Virtual Manufacturing”, Intl. conference on Machine Design and Industry Automation (ICAMDIA-2007) at COEP, Pune, January 10-12th 2007, pp 530-536, AMD,  Tata McGRAW- Hill Publishing Company Limited, New Delhi.

3.            Arunkumar Y. &  Dr. S. Mohan Kumar,  “Tools and Strategies for Virtual Cellular Manufacturing”, Intl. conference on Machine Design and Industry Automation (ICAMDIA-2007) at COEP, Pune, January 10-12th 2007, pp 417-423, AMD,  Tata McGRAW- Hill Publishing Company Limited, New Delhi.

4.            Dayananda Gowda, Dr. S. Mohan Kumar & Mr. K.V. Balasubramanya, “Implementation of Distributed Control Systems for the Automation of Pulp and Paper Industry”, Intl. conference on Machine Design and Industry Automation (ICAMDIA-2007) at COEP, Pune, January 10-12th 2007, pp 281-286, IA,  Tata McGRAW- Hill Publishing Company Limited, New Delhi.

5.            Roshan Dutt , Dr. S. Mohan Kumar & Mr. S.N. Satyanarayana, “Computational Technique for the Determination of Satellite Thruster Plume Flow Characteristics”, Proc. of the ”, Intl. conference on Machine Design and Industry Automation (ICAMDIA-2007) at COEP, Pune, January 10-12th 2007, pp 475-478, AMD,  Tata McGRAW- Hill Publishing Company Limited, New Delhi.

6.            Raju.B.S & Dr. S. Mohan Kumar, “E-Manufacturing of One-Off Intricate Castings using Rapid Prototyping Technology”, Intl. conference on Machine Design and Industry Automation (ICAMDIA-2007) at COEP, Pune, January 10-12th 2007, pp 373-378, IA,  Tata McGRAW- Hill Publishing Company Limited, New Delhi.

7.            Arunkumar Y. & Dr. S. Mohan Kumar,  “CAD Neutral formats for Virtual Manufacturing”, 11th NAFEMS World Congress 2007 to be held at Vancouver, Canada during 22nd  to 25th  May, 2007.

8.            Dr. S. Mohan Kumar, Roshan Dutt , & Mr. S.N. Satyanarayana,  “Simulation of the Satellite Thruster Exhaust Plume Characteristics based on Fox Model and Mayer Model – A Comparative Study”, 11th NAFEMS World Congress 2007 to be held at Vancouver, Canada during 22nd  to 25th  May, 2007.

9.            Arunkumar Y. & Dr. S. Mohan Kumar,  “Feature Extraction in CAD and Group Technology for Virtual Cellular Manufacturing” International Conference On Modeling And Simulation, (Emerging Methods towards Frontier Technologies), CITICOMS 2007, Coimbatore,  27-29 AUGUST 2007

10.            Sree Rajendra and Dr. S. Mohan Kumar, “Strategic Features of Product Database to Support Concurrent Engineering for Gear Transmission Systems”, International Conference On Modeling And Simulation, (Emerging Methods towards Frontier Technologies), CITICOMS 2007, 27-29 AUGUST 2007

11.            Dr. S. Mohan Kumar, Sreekumari Raghavan, A.K. Gupta &  Sanoop M.K. “Design and implementation of PID controller”, TeamTech-2007-Intl. Conference & Exhibition on Total Engineering Analysis & Manufacturing Technologies held at J. N. Tata Auditorium, I.I.Sc., Bangalore, India  during 4th  to 6th Oct., 2007. pp. 97

12.            Dr. S. Mohan Kumar &  Samanvita N., “Simulation and Implementation of an Active Aircraft Vibration Controller using dSPACE”, TeamTech-2007-Intl. Conference & Exhibition on Total Engineering Analysis & Manufacturing Technologies held at J. N. Tata Auditorium, I.I.Sc., Bangalore, India  during 4th  to 6th Oct., 2007. pp. 89

13.            Dr. S. Mohan Kumar, Neetha K.N., Dr. D.V.T.G. Pavan Kumar &  Narendra M.S., “Analysis of functionally graded beams for thermo mechanical behaviour”, TeamTech-2007-Intl. Conference & Exhibition on Total Engineering Analysis & Manufacturing Technologies held at J. N. Tata Auditorium, I.I.Sc., Bangalore, India  during 4th  to 6th Oct., 2007. pp. 69

14.            Manjunatha K., & Dr. S. Mohan Kumar, “Role of Virtual Prototyping for Modern day Collaborative and  Interactive Design Activities ”, TeamTech-2007-Intl. Conference & Exhibition on Total Engineering Analysis &  Manufacturing Technologies held at J. N. Tata Auditorium, I.I.Sc., Bangalore, India  during 4th  to 6th Oct., 2007. pp. 78

 

Vijayavithal Bongale

International Journal

1.      H.V. Divya, V.V. Bongale, G.C. Gopalkrishna, Laxmana Naik L, and B. Yogesha “Superplastic Behaviour of Aluminium Alloy-AA5083”,International Journal of Engineering Research & Technology IJSERT)  pp2740 to pp2748, Vol-2, Issue-7, July-2013.

 

2.      Kadam Rohan Chandrakant, Mr. Vijayavithal Bongale, Mr. Sree Rajendra “Design and Fabrication of Mobile Phone Controlled Four Legged Walking Robot” International Journal of Computational Engineering Research (IJCER) ver. 6, pp 47- 51, Vol. 3, Issue.7, July 2013.

 

3.      S. Sarayu, Sree Rajendra, V. V. Bongale, “Design and Fabrication of Prototype of Automated Smart Car Parking System using Programmable Logical Controllers (PLC)” International Journal of Scientific Engineering and Technology (IJSET) Issue 9,  Volume 2  Sept. 2013.

 

4.      Arun S., Sree Rajendra, Vijayavithal Bongale, “Automatic Punching Machine: a low cost approach”,  International Journal of Advanced Mechanical Engineering, Page no. 509-517, ISSN 2250-3234, Volume 4, Number 5, 2014.

 

5.      Darshan, H V Ramakrishna, Vijayavithal Bongale, , PLC Based Automatic Powder Coating Machine Controller, International Journal of Applied Engineering Research,ISSN 0973-4562 Volume 9, Number 7 (2014) pp. 755-763

 

6.      Shashank Lingappa M., Vijayavithal Bongale, Sreerajendra, “PLC Controlled Low Cost Automatic Packing Machine”, International Journal of Advanced Mechanical Engineering.ISSN 2250-3234 Volume 4, Number 7 (2014), pp. 803-811

 

National conferences

1.      Vijayavithal Bongale, N.Venkatrayulu and D.Prithviraj, “Some Experimental Investigations in a Vaneless Diffuser of a Centrifugal Compressor”, National Conference on Fluid Machinery, K. J. Somaiya College of Engineering, Bombay. March 11-13, 1994, pp B2-1 to B2-5.

 

2.      Vijayavithal Bongale, N.Venkatrayulu and D.Prithviraj, “Experimental study of Centrifugal Impeller discharge flow using a single sensor straight hot-wire probe”, proceedings IX ISME conference on Mechanical Engineering, Nov. 10-11, 1994, Department of Mechanical and Industrial Engineering, University of Roorkee, Roorkee   PP 347 - 352.

 

3.      Vijayavithal Bongale, Dr. Joseph Gonsalvis,  “Influence of  Preheated Air on  the Performance of a Four Stroke Petrol Engine”, National Conference on Emerging trends on Thermal Engineering, Competitive manufacturing and Management (TECM) 2006, St.Joseph’s College of Engineering – Chennai- India , 2nd and  3rd , Feb 2006.

 

4.      Vijayavithal Bongale, Dr. M.K.Partha,  “Non-Linear convection in a non-Darcy porous medium”, National Conference on Emerging trends in Mechanical Engineering, Department of Mechanical Engineering, B.M.S. College of Engineering, Bangalore. 28-29, Aug. 2008.

 

5.      Shashank Lingappa M., Vijayavithal Bongale, “Design and Fabrication of automatic packing machine for different sized products”, National Conference on Advances in Mechanical Engineering (AIM 2014), April 25th 2014,T.John Institute of Technology.

Inter-National conferences

 

1.      Vijayavithal Bongale & Sree Rajendra. “Influence of Geometric Discontinuities on Stress Distribution of A Connecting Rod”, International Conference on Simulation & Modeling Held at CITICOMS, 2007, CIT Coimbatore, 27-29 Aug. 2007.

 

 


C.V.Venkatesh

 

Inter National Journal

1.      N.N. Kishore, Dattha D., Venkatesh C.V. “Application of Multi Dimensional Cluster Analysis in Identification of Defects in Fibre Composites”, Journal of Non – Destructive Testing and Evaluation, 1995, Vol. 12, pp – 197 to 210.

2.      Venkatesh, C.V., Ganesh Sundara Raman, S., Uday Chakkingal , “Low Cycle Fatigue Behaviour of Al-Mg-Si Alloy AA6061 Processed by Equal Channel Angular Pressing” Advanced Materials research, Vols. 463-464 (2012) pp 97-101.

3.      C. V. Venkatesh, S. Ganesh Sundara Raman, Uday Chakkingal, “Characterization of AA6061 Alloy Processed by Equal Channel Angular Pressing and Subjected to Low Cycle Fatigue”, Trans IIM, Trans IIM, 2013, 66(2), 147-154.

National conferences

1.      Venkatesh C.V, Jayaram S.R., “Experimental Investigation on Effect of Blending of  Mo S2 and Graphite with Nylon-66”, 59th Annual meeting of STLE 

2.      Venkatesh C.V, Jayaram S.R., “Experimental Study of Graphite and Mo S2 blended Nylon-66 as a Potential Tribological surface”, ASTMM 2004, JNTU Hyderabad 

3.      Venkatesh C.V.Jayaram S.R., “Non – Conventional Materials for Bearing Applications”, – A Review. ASTMM 2004, JNTU Hyderabad.2005

Inter National conferences

1.      Venkatesh C.V.Jayaram S.R., “Investigation of Mechanical Properties of Nylon 66 and MoSi blends”, ICIT, Indian Institute of Science, Bangalore – 2006.

2.      Venkatesh, C.V., Nitesh, S., Uday Chakkingal , Ganesh Sundara Raman, S. “Characterisation    of Inhomogeneity in Deformation after Equal-Channel Angular Pressing by Hardness Measurements’, International Symposium for research scholars (ISRS 2010), IIT Madras,20-22, Dec 2010.

3.      C. V. Venkatesh, S. Ganesh Sundara Raman, Uday Chakkingal,“Influence of Equal Channel Angular Pressing Route on Low Cycle Fatigue Behaviour of Aluminium Alloy 6061”, 65th Annual Technical Meeting (ATM) of the Indian Institute of Metals (IIM), Nov. 13-16, 2011, Hyderabad, India.

4.      C. V. Venkatesh, S. Ganesh Sundara Raman, Uday Chakkingal, “Low Cycle Fatigue Behaviour of Aluminium Alloy 6061 Processed by Equal Channel Angular Pressing through Two Different Routes”, paper presented at 9th Int. Conf. on Fatigue Damage of Structural Materials (ICFDSM), Sept. 16 -21, 2012, Hyannis, MA, USA.

 

S N Ravi Shankar

International Journal

 

1.      Amriya Tasneem H R., Dr. K. R. Prakash, S. N. Ravi Shankar, “Introduction to remote PLC Programming course using Modular Mechatronics System”, June 2012, in international journal emerging technology and advanced engineering. IJETAE (paper under review).

International Conference

1.       Amriya Tasneem H R., Dr. K. R. Prakash, S. N. Ravi Shankar, “The development of a robotics remote laboratory for modular Mechatronics system”, International conference on current trends in engineering and management, July 12-14, vidyavardhaka college of engineering, Mysore, 2012.

2.      Amriya Tasneem H R., Dr. K. R. Prakash, S. N. Ravi Shankar, “Introduction to PLC based remote laboratory for modular Mechatronics system”, International conference on advancements and future trends in mechanical and materials engineering – AFTMM, October-2012, Punjab technological university.

L.Laxmana Naik

International Journal

1.      Laxmana Naik L, Mahesh D.C., H.V. Divya, B. Yogesha and  S.S. Bhattacharya “Superplastic Tensile Behaviour of a Ti-Al-Mn Alloy”  International Journal of Scientific & Engineering Research ( IJSER) Vol-3, Issue-3, March-2012.

2.      Laxmana Naik L, Prathap M.S., and B. Yogesha “ Automated Drug Dispensing System”  International Journal of Soft computing & Engineering ( IJSCE) Vol-2, Issue-3, July – 2012.

3.      Laxmana Naik L, H.V. Divya, G.C. Gopalkrishna, V.V. Bongale and B. Yogesha  “Super plastic Behaviour of Aluminium Alloy-AA5083”  International Journal of Engineering Research & Technology IJSERT)  pp2740 to pp2748, Vol-2, Issue-7, July-2013.

4.      Arpitha G R, Sanjay M R, L Laxmana Naik, B Yogesha, “Mechanical Properties of Epoxy Based Hybrid Composites Reinforced with Sisal/SIC/Glass Fibers” International Journal of Engineering Research and General Science (IJERGS), Volume 2, Issue 5, August-September,2014, ISSN: 2091-2730.

 

Hareesha M.

Inter National Journal

1.      Hareesha.M. & Jeevan T.P. , “Modification of Abrasive Wear Testing Machine and Testing of Materials” International Jurnal of Science and Research (IJSR) ISSN Volume 3, 10th October 2014.

 

 

Dr. B. Yogesha

Inter National Journal

1.      B.Yogesha & S. S. Bhattacharaya “Superplastic Behavior of Ti_Al-Mn alloy”.International Journal Materials Science and Manufacturing Science & Production Vol9, Nos 1 – 2, 2008.

2.      H. Nagaprasad, B.Yogesha “Enrichment of Quality and Productivity through Simple Measurement Techniques”. Proceedings of the International MultiConference of Engineers and Computer Scientists 2008 Vol II IMECS 2008, 19-21 March, 2008, Hong Kong.                   

3.      H. Nagaprasad, B.Yogesha “Making World Class Product Through Quality Process Management” Proceedings of the World Congress on Engineering and Computer Science 2008 WCECS 2008, October 22 - 24, 2008, San Francisco, USA.

4.      H. Nagaprasad, B.Yogesha “Enrichment of Customer Satisfaction Through Total Quality Management Techniques”. Proceedings of the International MultiConference of Engineers and Computer Scientists 2009 Vol II IMECS 2009, March 18 - 20, 2009, Hong Kong.

5.      B.Yogesha& S. S. Bhattacharaya “Superplastic hemispherical Bulge Forming of a Ti-Al-Mn Alloy”.International Journal of Scientific & Engineering Research,     Volume 2, Issue 12, December 2011.

6.      Mahesh D.C, H.V.Divya, Laxmana Naik. L,  B.Yogesha& S.S. Bhattacharaya “Superplastic Tensile Behavior of Ti_Al-Mn alloy” International Journal of Scientific & Engineering Research, Volume 3, Issue 3, March 2012.

7.      Pratap M. S, L. Laxman Naik, B. Yogesha “Automated drug dispensing system”International Journal of Soft Computing and Engineering ( IJSCE), Volume 2, Issue 3, July 2012.

8.      Naveen P. B Yogesha and Manish Jain “Optimization of Robotic Arc Welding Process by Eliminating PLC to Reduce the Overall Cost” International Journal of Engineering Research and Technology(IJERT) ISSN: 2278-0181, Volume 2, Issue 6, june- 2013.

9.      A.N Basavraju, Joseph Gonsalvis and  B. Yogesha “Simultaneous Attainment of Fuel Consumption, High Output Power and Low Exhaust Emission in a Preheated Fuel Of 350cc Si Engine”, IOSE Journal of Engineering (IOSRJEN), Volume 3, Issue 4, April 2013.

10.  A.N Basavraju,  Joseph Gonsalvis and  B Yogesha, “Performance study of Methanol Blended Petrol in SI Engine”, International Journal of Engineering Science Invention, Volume 2, Issue 3, March 2013.

11.  Divya H. V. , Laxmana Naik L, G. C. Gopalkrishna, V. V. Bongale, Yogesha .B “ Superplastic Behaviour of Aluminium Alloy-AA5083”, International Journal of Engineering Research & Technology, Vol 2,  Issue 7, July-2013.

12.  Neethashree N.R, B. Yogesha, Gudipati Pradeep Kumar “Automation Of Alternator Test Bench To Ensure Accurate Testing Using Plc And Hmi”, International Journal of Engineering Research & Technology (IJERT), Vol. 2 Issue 7, July – 2013 (ISSN: 2278-0181).

13.  Swathy S. P., M. G .Vasundhara and  B. Yogesha “PLC Based Automatic Racking System”. International Journal of Engineering Research & Technology (IJERT), Vol. 2 Issue 8, August – 2013 (ISSN: 2278-0181).

14.  Shiraz pasha B.R. & B. Yogesha, “Microcontroller based Automated Irrigation System”, The International Journal of Engineering & Sciences (IJES), Vol.3, Issue 7. (ISSN (e):  2319-1813). July-2014.

15.  Sanjay M R, Arpitha G R, B Yogesha, “Investigation on Mechanical Property Evaluation of Jute - Glass Fiber Reinforced Polyester”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 4 Ver. July- August. 2013, pp50-57.

16.  Sanjay M R, Arpitha G R,Vasubdhara M G, B Yogesha, ”Study on Mechanical Characteristics of Unidirectional Sisal/Glass Fiber Reinforced Polyester Hybrid Composites ”, International Journal of Science and Research (IJSR), Volume 3 Issue 8, August 2014, ISSN: 585-588.

17.  Arpitha G R, Sanjay M R, L Laxmana Naik, B Yogesha, “Mechanical Properties of Epoxy Based Hybrid Composites Reinforced with Sisal/SIC/Glass Fibers” International Journal of Engineering Research and General Science (IJERGS), Volume 2, Issue 5, August-September,2014, ISSN: 2091-2730.

18.  Arpitha G R, Sanjay M R, B Yogesha,” REVIEW ON COMPARATIVE EVALUATION OF FIBER REINFORCED POLYMER MATRIX COMPOSITES” Advanced Engineering and Applied Sciences: An International Journal 2014; 4(4): 44-476,October 2014.


National conferences

1.      Dr. B.Yogesha & Dr. S. S. Bhattacharaya “Superplasticity and Superplastic Forming Behavior of Alloy in Aerospace Application”, at the National Conference on Development of Advanced Composite Components in Aerospace and Automobile Applications, February 9-10, 2007. B.I.E.T Davanagere, Karnataka.

2.      Dr.Yogesha.B,& Sanjay M.R   “Study on Tensile Property Evaluation of Jute – Glass Fiber Reinforced Polyester”. National conference on Advancement in materials Science (AMS 2014) Coimbatore Institute of Technology, Coimbatore, Tamil Nadu, India, Sept 26th & 27th 2014.

 

 

Inter-National conferences

1.      Dr. B.Yogesha & Dr. S. S. Bhattacharaya “Experimental Investigations on the Superplastic Behaviour of A Ti-Al-Mn Titanium Alloy”, at the “Eighth International Conference on non-ferrous metals-2004, August 6-7, 2004. Hotel Oberoi, Bangalore. India.

2.      Dr. B.Yogesha & Dr. S. S. Bhattacharaya “Some Studies on the Superplastic Deformation Behavior of a Ti-Al-Mn Alloy”, at the 3rd International Conference on material processing for properties and performance (MP3), 24-26 November 2004, Singapore.

3.      Dr. B.Yogesha & Dr. S. S. Bhattacharaya “SUPERPLASTIC BULGE FORMING OF A TI-AL-MNALLOY”, at the International Symposium of Research Students on Materials Science and Engineering (ISRS-2004)during December 20-22, 2004, IIT Madras Chennai, India.

4.      Dr. B.Yogesha & Dr. S. S. Bhattacharaya “Hemispherical Bulge Forming of a Ti-Al-Mn Alloy by Superplastic Forming”, at the International Symposium of National Metallurgist Day and Annual Technical Meeting (NMD-ATM-2006), 13-16 November 2006 at Jemshedpur (Tatanagar), India.

5.      Dr. B.Yogesha & Dr. S. S. Bhattacharaya “Experimental and Numerical Approaches in Superplastic Hemispherical Bulge Forming of a Ti-Al-Mn Alloy”, at the 5th International Conference on material processing for properties and performance (MP3), 11-15 December 2006, Singapore.

6.      Dr. B.Yogesha & Dr. S. S. Bhattacharaya “Superplastic Forming Behavior of Ti_Al-Mn alloy”,International Conference on Materials Processing for Properties and Performance (MP3 - 2007). Beijing, China (13th-16th  September, 2007).

7.      Dr. B. Yogesha & Dr. H. Nagaprasad “Productivity Enrichment through Organisation of Materials Management”, International Conference on Materials Processing for Properties and Performance (MP3 - 2007). Beijing, China (13th -16th September, 2007)

8.      Dr. B.Yogesha & Dr. S. S. Bhattacharaya “Thermo Forming  of Titanium Alloy”, at the International Symposium of National Metallurgist Day and Annual Technical Meeting (NMD-ATM-2007), 16-19 November 2007 at Nehru Centre, Mumbai, India.

9.      B.Yogesha, Anusha harish & S. S. Bhattacharaya “Prediction of forming behavior of titanium alloy using artificial neural networks”, International Conference on Materials Processing for Properties and Performance (MP3 - 2008). Singapore. (5th -7th Nov, 2008).

10.  Naveen.P, B. Yogesha and Manish Jain “Optimization of Robotic Arc Welding Process by Eliminating PLC” at the cogNIEscience the national level technical paper presentation, 10th -11th May 2013 at NIE Mysore.

11.  Neethashree N.R, B. Yogesha, Gudipatti Pradeep Kumar “ Automation of Alternator Test Bench using Siemens S7-300” at the international conference on Advanced Materials, Manufacturing, Management and Thermal sciences, held 3rd and 4th May 2014 at SIT, Tumkur.

12.  B.Yogesha, Divya H.V & S.S.Bhattacharaya “Superplasticity and Superplastic Tensile Behaviour of AA5083”, 2nd International conference on Manufacturing engineering and Technology for Manufacturing Manufacturing Growth (METMG2014), January 20-21, 2014, Miami, State of Florida, USA.

13.  Sanjay M R, B.Yogesha & N K S Rajan, “Experimental and CFD simulation of Producer Gas Carburetor” 2nd International Conference on Materials Mechanics and Management (IMMM-2014), 17-19 Dec 2014 at College of Engineering, Trivandrum, Kerala, India.

 

Dr. K. A. Venugopal

International Journal

1.      K. A. Venugopal, S. Paul, A. B. Chattopadhyay “Growth of tool wear in turning of Turning Ti-6Al-4V Alloy under Cryogenic cooling”, Wear 262 (2007), 1071 - 1078.

2.      K. A. Venugopal, S. Paul, A. B. Chattopadhyay “Tool wear in Cryogenic turning of Ti-6Al-4V Alloy”, Cryogenics 47 (2007) 12 - 18

3.      K. A. Venugopal, R. Tawade, P. G. Prashanth, S. Paul, A. B. Chattopadhyay “Turning of Titanium Alloys with TiB2 Coated Carbides under Cryogenic Cooling”, Proceedings Institution of Mechanical Engineers, Vol: 217 Part:B, Journal of Engineering Manufacture, 1697 – 1706,

4.      K. A. Venugopal “Investigation on Plasma Sprayed Ceramic Coatings on Austenitic Manganese and Mild steels”, Surface Engineering 1999, Vol:15, No-6, 465 - 468

5.      K.A. Venugopal “A Study on Influence of Altering the Tooth-Sum on Bending Stress in External Spur Gears Under Static Loading”, Inter-National Journal of Recent Development in Engineering and Technology. Vol:3, Issue 1, July2014

 Composite Component Construction, 12th – 13th September2005, JNTU College of      Engineering, Kakinada.

 

National Conference

1.      K. A. Venugopal, “Instability Analysis of Columns under Distributed follower load & varied degree of Non-conservativeness”, National Conference on Composite Component Construction, 12th – 13th September 2005, JNTU College of Engineering, Kakinada.

2.      K. A. Venugopal, “Effect of Cryogenic Cooling with Liquid Nitrogen Jets in Turning Titanium Alloy”, Proceedings, Conference on Recent Trends in Manufacturing (CARTM-2003),21-35,  Govt. Engineering College, Kalyani, West Bengal.

3.      K. A. Venugopal “Instability Analysis of Columns under Distributed follower load & varied degree of Non-conservativeness”, National Conference on Composite Component Construction, 12th – 13th September 2005, JNTU College of Engineering, Kakinada.

 

International Conference

4.      K. A. Venugopal “On Effect of Cryogenic cooling on Tool Wear in Turning Ti-6Al-4V Alloy”, Proceedings of International MATADOR Conference, University of Manchester, U.K. 2004.

5.      K. A. Venugopal “Growth of tool wear in turning of Turning Ti-6Al-4V Alloy under Cryogenic cooling”, Wear 2006, article in press.

6.      K. A. Venugopal “Tool wear in Cryogenic turning of Ti-6Al-4V Alloy, Cryogenics” 2006, article in press.

 

 

 

 

 

Dr. H. V. Ramakrishna

 

National conferences

1.      Dr. H. V. Ramakrishna “Severity of misalignment of rotor bearing system”, Journal of Association of engineers of India, 1988.

2.      Dr. H. V. Ramakrishna “Terro technology – A case study”, Journal of association of engineers (India), Calcutta, 1988.

3.      Dr. H. V. Ramakrishna “Study of Coast Down Phenomenon using Energy Concepts”, – National Symposium on Acoustics-97, Vishakapatnam.

4.      Dr. H. V. Ramakrishna Paper title “Determination System Damping A new approach” is presented in the National Conference on Industrial Problems Machines and Mechanisms 2005 at IIT Kharagpur.

5.      Dr. H. V. Ramakrishna “Jatropha – Rubber seed oil blends for compression ignition engine”, Attended National Conference Advanced Vehicle Technology, at Bharath University, Selaiyur, Chennai-India, – 08, 29th February 2008.

6.      Dr. H. V. Ramakrishna “Characteristics of a compression ignition engine using binary mixture of jatropha oil and rice bran oil”, Attended National Conference Thermal, Design, Material and Manufacturing Engineering – 09 Malnad College of Engineering, Hassan (India), 5 – 7 March 2009.

International conferences

1.      Dr. H. V. Ramakrishna Attended International Conference “STLE” on fluid film bearings from 17 to 20 May 2004. Presented paper titled “Evaluation of System Damping Using Run Down Time for Rotors mounted on Fluid Film Bearings”. – A new technique” at TORANTO – CANADA.

2.      Dr. H. V. Ramakrishna Attended International Conference on Recent Trends in Materials and Mechanical Engineering, (TN), INDIA, “A comparative study of behavior of compression ignition engine using rubber seed oil and rice bran oil in mixed mode” at Dr. Mahalingam College of Engineering and Technology, Pollachi, 18-20 Dec 2008.

3.      G.M.   Satyanarayana, H.V.   Ramakrishna   and   C.T.Jayadeva Attended International Journal of Scientific and Research Publications, Presented paper titled “Mathematical programming Techniques to evaluate Indian rural health care programs—An Empirical Study.” Istanbul, Turkey, July 3-6, 2012.

 

Inter-National Journal

1.      G.M.   Satyanarayana, H.V.   Ramakrishna   and   C.T.Jayadeva Attended International Journal of Scientific and Research Publications, Presented paper titled “Business   Process Reengineering for Indian Rural Health Care Sector using Data Envelopment Analysis Technique.” Volume 2, Issue 5, May 2012, pp. 1-6. ISSN 2250-3153.

2.      G.M. Satyanarayana, H.V.Ramakrishna and C.T. Jayadeva Management Attended International Journal Presented paper titled “Evaluation of Indian rural   health care programs: By the application of Data Envelopment Analysis Technique.” Bonfring International Journal of Industrial Engineering and Science, Vol. 2, No. 1, March 2012, pp. 10-13.ISSN 2277-5056.

3.      Gururaj M Gadad, H.V.Ramakrishna, Srinath M.S & S S Balli, “Dyad Synthesis of planar Seven-link variable topology mechanism for motion between two dead-centre positions”, IOSR Journal of Mechanical & Civil Engineering (IOSR-JMCE) vol.3, issue 3, pp – 21-29, 2013

4.      Vijayavithal Bongale, Darshan, H V Ramakrishna, PLC Based Automatic Powder Coating Machine Controller, International Journal of Applied Engineering Research,ISSN 0973-4562 Volume 9, Number 7 (2014) pp. 755-763

 

 

Dr. Srinath M S

National Journal

1.      Srinath M.S., Apurbba Kumar Sharma, Pradeep Kumar, “Microwave processing of metals and its characterization”- Journal of Mechanical Engineering, 1[1], 21-25.

2.      Gururaj M. Gadad, M S Srinath, Harsheet A Suryavanshi, “Machinability aspects of Aluminium alloy on CNC Machine”, IJMEMS, 5[2], 123-127.

 

National conferences

1.      Srinath M.S., A.K.Sharma and Pradeep Kumar, (2009), “Microwave Processing of Metals and its Developemnts”Proc. National Conf. on RAMP-2009, College of Technology, Panthnagar, Feb. 12-14, 2009, 330.

2.      Srinath M.S., C. Suresh Kumar, A.K.Sharma, P.Kumar, “Sintering of Copper through Microwaves: Novel Developments in Metallic Material Processing”,Proc. National Conf. on NCAMT-2009, SMVDU Katra, Jammu, Nov. 5-6, 2009, 358.

3.      Srinath M.S., A.K.Sharma, P.Kumar, “Joining of Bulk Metallic Materials using Microwave Energy”,Proc. National Symposium on Microwave Processing of Materials, NSMWP-2010, IIT Delhi, Nov. 28, 2010, 31.

4.      Srinath M.S., G V Naveen Praksah, “Comparison of Total Quality Management and Business Process Re-Engineering”, National Conference on TQM for continuous Quality Improvement in Technical Education at NITTIE institute of Technology, NITTIE, 2006, 208-213.

5.      Srinath M.S., G V Naveen Praksah “Total Quality Management in Educational Institution - A Perception, National Conference on TQM for continuous Quality Improvement in Technical Education” at NITTIE institute of Technology, NITTIE, 2006, 200-207.

6.      Smitha C.S., Srinath M.S., G V Naveen Praksah, “Kaizen Technique for an Industry-A case study”,National Conference on Advances in Mechanical Engineering, Jamia Milla Islamia University, New Delhi, 2006, 527-532.

 

Inter National Journal

1.      Srinath M.S., Apurbba Kumar Sharma, Pradeep Kumar, “A Novel Route for Joining of Austenitic Stainless Steel (SS-316) using Microwave Energy”,Proceedings of the Institution of Mechanical Engineers, Part B, J. of Engineering Manufacture, 225 [7], 1083-91.

2.      Srinath M.S., Apurbba Kumar Sharma, Pradeep Kumar,  A New Approach to Joining of Bulk Copper using Microwave Energy –Materials and Design,32, 2685-2694.

3.      Srinath M.S., Apurbba Kumar Sharma, Pradeep Kumar, Investigations on microstructural and Mechanical Properties of Microwave Induced Dissimilar Joints, Journal of Manufacturing Process, 13[2],141-146.

4.      Srinath M.S., Suryanarayana Murthy P, Apurbba Kumar Sharma, Pradeep Kumar, Kartikeyan M.V., Simulation of Microwave Heating while Joining of Bulk Copper,Journal of Engineering Science and Technology, 4[2], 152-158.

5.      Gururaj M Gadad, H V Ramakrishna, M S Srinathand S S Balli, “FSP synthesis of seven-link variable topology mechanism for function and motion generation”International journal of Technology and Research Advances, 2013, vol 1, pp 32-38

6.      Gururaj M Gadad, H.V.Ramakrishna, Srinath M.S & S S Balli, “Dyad Synthesis of planar Seven-link variable topology mechanism for motion between two dead-centre positions”, IOSR Journal of Mechanical & Civil Engineering (IOSR-JMCE), 2013, vol.3, [3], pp – 21-29

7.      Pavithra D. S. and M. S. Srinath, GSM based Automatic Irrigation Control System for Efficient Use of Resources and Crop Planning by Using an Android Mobile, IOSR Journal of Mechanical & Civil Engineering (IOSR-JMCE), 2014, vol.11, [4], pp-

 

 

Inter National conferences

1.       Srinath M.S., C. Suresh Kumar, A.K.Sharma, P.Kumar, “Processing of Copper through Microwaves: Developments at IIT Roorkee”,Proc. Intl. Conf. on RETMAC-2010, NITK, Surathkal. Feb. 14-15, 2010, 169

2.       Srinath M.S., A.K.Sharma, P.Kumar, “Microwave Welding Of Stainless Steel and Its Characterisation: A Novel Development in Material Processing”, Proc. Intl. Conf. on FIME-2010, NITK, Surathkal, May 20-22, 2010, 120

3.       Srinath M.S., A.K.Sharma, Pradeep Kumar, “Simulation and Analysis of Microwave Heating while Joining Bulk Coppe”r- Proc. COMSOL Conf. 2010, Bangalore, Oct. 29-30, 2010.

4.       Srinath M.S., A.K.Sharma, Pradeep Kumar, “Microstructural Investigations on Microwave Induced Dissimilar Joints”, Proc. Intl. Conf. AMMMT-2010, SIT Tumkur, Nov. 17-18, 2010, 71.

5.       Srinath M.S., C. Suresh Kumar, A.K.Sharma, P.Kumar, “Joining of copper through microwaves”Poster Proc. 3rd Intl. Conf. and 24th AIMTDR-2010, Vishakhapatnam, Dec. 13-15, 2010, 467.

6.       Suryanarayana Murthy P, Srinath M S, Sharma A K and Pradeep Kumar, “An fem approach to analysis of microwave heating of alumina in multi-mode applicator”,  Proc. International Conf. on Mathematical Modeling and Applications to Industrial Problems, NIT Calicut, March 28-31, 2011.

7.       Srinath M.S., A.K.Sharma, Pradeep Kumar, “A Novel Method for Joining of Stainless Steel (Ss-316) Through Microwave Energy”,Proc. TMS-2011, 140th Annual Meeting & Exhibition, Feb.27-March 3, 2011, San Diego, California, 279-286.

8.       Srinath M.S., A.K.Sharma, Pradeep Kumar, “Comparative study of Microwave welded and TIG welded stainless steel (SS-316) Joints”,Proc. (MS&T-11) Materials Science & Technology 2011 Conference & Exhibition October 16-20, 2011 | Columbus, Ohio.

9.        Srinath M.S., Suryanarayana Murthy P, Apurbba Kumar Sharma, Pradeep Kumar, “Finite Elemental Analysis of Microwave Joining of Bulk Metals”, Proc. ICCMM, Dec. 15-16, 2011, IIT Guwahati, India, 172-177.

10.    Arun.A, Srinath M.S, “An Innovative Technology for Remote Controlling and Monitoring of Robotic applications”ICCTEM, VVCE, Mysore, July 2012, 73-79.

11.    Gururaj M. Gadad, M S Srinath, Harsheet A Suryavanshi, “Machinability aspects of Aluminium alloy on CNC Machine”, ICCTEM, VVCE, Mysore, July 2012, 80-84.

12.    M.S.Srinath, NarendraNath S, Ravindra I B, Dheeraj Gupta, A K Sharma, Material Joining Using Microwaves: An Innovative Approach”,ICCTEM, VVCE, Mysore, July 2012, 96-101.

13.    M.S.Srinath, ‘Microwave Energy in Manufacturing – Potentials and Practices” (AMMMT 2013), Siddaganga    Institute of Technology, Tumkur on 3 & 4th May, 2013.

14.    Srinath M.S., A.K.Sharma, Pradeep Kumar, “Parametric optimization of the copper joints developed through Microwave Heating”,Proc. Intl. Conf. (AMMMT 2013), at  Siddaganga    Institute of Technology, Tumkur on 3 & 4th May, 2013. pp.91.

15.    Dr.M.S.Srinath “Theoretical and Experimental Analysis of Microwave Joining of Stainless Steel”, international conference on MS&T’ 13, Palais des Congres de Montreal Montreal, Quebec, Canada, October 27 – 31, 2013

16.    M.S.Srinath, Narendranath S, Ravindra I B, “Microstructural Analysis of Inconel-625 Alloy Joint Produced by Microwave Heating,IInd ICCTEM, VVCE, Mysore, July 2014 (Accepted).

17.  Harshavani M.D, Sree Rajendra, Arunkumar Y, Srinath M.S., “Analysis and Optimization of Process and Die Parameters in Closed Die Forging Through Simulation”, IInd ICCTEM, VVCE, Mysore, July 2014 (Accepted).

18.    Roopa R, Srinath M.S., Arunkumar Y. Sree Rajendra, “Evaluation and Improvement of Critical Process Parameters in High Pressure Die Casting Using Simulation”, IInd ICCTEM, VVCE, Mysore, July 2014 (Accepted).

Sree Rajendra

National Journal

1.      Sree Rajendra, B.J.Ranganath “Computer aided Design of Machine Tool Gear Box”, Journal of National Design and Research Forum, PP 41-46, April – June, 1993.

International Journal

1.      Dinesh, Sree Rajendra, “Pressure Sensor Based Event Data Recorder”, in International Journal of Modern Engineering Research (IJMER), ISSN: 2249-6645, volume 2, issue 4, July-Aug-2012. pp-1972-1976

2.      Megha Anand S.A., Sree Rajendra, Supratic Sarkar, “Application of Distributed Control System in Automation of Process Industries” in international journal emerging technologyand advanced engineering. (ISSN 2250 -2459),volume 2, issue 6, june 2012.

3.      Mahesha P.K, Sree Rajendra, “Design and Fabrication of Automatic Wall Plastering Machine Prototype”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 4 Ver. I (Jul- Aug. 2014), PP 01-06

 

4.      Sarayu, S., Sree Rajendra., and Bongale, V. V., “Design and Fabrication of Prototype of Automated Smart Car Parking System using Programmable Logic Controllers (PLC)” . International Journal of Scientific Engineering and Technology, Volume No.2, (01 Sept.2013) Issue No, pp :857-860.

 

5.      Kadam Rohan Chandrakant., Bomgale V.V. and Sree Rajendra, “Design and Fabrication of Mobile Phone Controlled Four Legged Walking Robot.” International Journal of Computational Engineering Research (IJCER), ISSN No. 2250-3005, Vol 3, July 2013.

 

6.      Arun S., Sree Rajendra, Vijayavithal Bongale, “Automatic Punching Machine: a low cost approach”,  International Journal of Advanced Mechanical Engineering, Page no. 509-517, ISSN 2250-3234, Volume 4, Number 5, 2014.

 

7.      Vijayavithal Bongale, Shashank Lingappa M., Sreerajendra, “PLC Controlled Low Cost Automatic Packing Machine”, International Journal of Advanced Mechanical Engineering.ISSN 2250-3234 Volume 4, Number 7 (2014), pp. 803-811

 

 

National conferences

1.      Sree Rajendra, “Enhancement of cutting Tool life by Mist Cooling”, National Seminar on Newer Manufacturing, Techniques for improved productivity (NEMTIP-91) PP 88-96, Mysore on 23rd november1991.

2.      Sree Rajendra Venugopal H.P and Mohan Kumar S., “Usage of VR Techniques for Motion Analysis” AICTE sponsored National conference on Mechanical Engineering (NATCON.ME-2006) held during 27th-28th May, 2006 at Siddaganga Institute of Technology, Tumkur-572103, Karnataka, pp. 21.

3.      Sree Rajendra Venugopal H.P and Mohan Kumar S.A “Concurrent Engineering Approach of   Component Design for Engine Bleed System and it’s Thermal Analysis in an Virtual Environment”. National Conference held at JSS, College, Ooty Road, Mysore Sept. 25 – 26, 2006.

4.      Dinesh, Sree Rajendra, “A Real-Time Pre-Crash Data recording System”, 2nd national Conference on Networking, Embedded and Wireless Systems, August-2012.

5.      S. Mohan Kumar, Vijay. R, Sree Rajendra, K. Manjunath  Low Cost Automation Using Electro Hydraulic System-A Case Study In Cam Bush Pressing For Engine Assembly Line”National Conference , ETIME-2008, BMSCE, Bangalore.

6.      Vijay .R,Sree Rajendra, S.Mohankumar, Automation of Engine Cam bush pressing using electro hydraulic Systems,NATDMME-09,5-7, March-2009,MCE,Hassan

7.      Arun S., Sree Rajendra, “Automatic Punching Maching controlled by PLC”, National Conference on Advances in Mechanical Engineering (AIM 2014), April 25th 2014,T.John Institute of Technology.

Inter-National conferences

1.      Sree Rajendra & Mohan Kumar S. “Strategic Features of Product Database to Support Concurrent Engineering for Gear Transmission Systems”, International Conference on Simulation & Modeling Held at CITICOMS, CIT Coimbatore, 2007, 27-29 Aug. 2007.

2.      Sree Rajendra & Vijayavithal Bongale. “Influence of Geometric Discontinuities on Stress Distribution of A Connecting Rod”, International Conference on Simulation & Modeling Held at CITICOMS, 2007, CIT Coimbatore, 27-29 Aug. 2007.

3.      Megha Anand S.A., Sree Rajendra, Supratic Sarkar, “Application Of Distributed Control System for Process Industries”, International conference on current trends in engineering and management, July 12-14, vidyavardhaka college of engineering, Mysore, 2012.

4.      Harshavani M.D, Sree Rajendra, Arunkumar Y, and Srinath M.S., “Analysis and Optimization of Process and Die Parameters in Closed Die Forging Through Simulation”, IInd ICCTEM, VVCE, Mysore, July 2014 (Accepted).

5.      Roopa R, Srinath M.S., Arunkumar Y. andSree Rajendra, “Evaluation and Improvement of Critical Process Parameters in High Pressure Die Casting Using Simulation”, IInd ICCTEM, VVCE, Mysore, July 2014 (Accepted).

G.C.Gopalakrishna

International Journals

1.      G.C. Gopalkrishna, H.V. Divya, Laxmana Naik L, V.V. Bongale and B.   Yogesha  “Superplastic Behaviour of Aluminium Alloy-AA5083”  International Journal of Engineering Research & Technology IJSERT)  pp2740 to pp2748, Vol-2, Issue-7, July-2013.

S.L. Dinesh 

Natiomnal Conference

1.            S.L.Dinesh.and Dr.S.R.Jayaram, “Reclamation device for used oils” 11th National Conference of Mechanical Engineering, Bhopal November 25th & 26th 1995.

2.            S.L.Dinesh. and Dr.S.R.Jayaram, “Lubrication Management” A New Approach, ICIT, Indian Institute of Science, Bangalore – 2006.

 

International Conference

1.      S.L.Dinesh.and Dr.S.R.Jayaram, “Re refining of used oils – Case studies” 8th – 12th April 2002, Jamshedpur, India

2.      S.L.Dinesh.Y.M.Shashidharand Dr.S.R.Jayaram, “Development of Bio Fuels in Indian context – A review” 23rd – 25th March  2006, at NITK, Surathkal

 

S.Pradeep

International Journal

1.      S. Pradeep and Vivek Pancholi, “Effect of microstructural inhomogenity on superplastic behaviour of multipass friction stir processed aluminum alloy”,Mater. Sci. Engg. A., Vol. 561, pp. 78-87, 2013

2.      S. Pradeep, Sumit Kumar Sharma and Vivek Pancholi, “Microstructural and mechanical characterization of friction stir processed 5086 aluminum alloy, Mater. Sci. Forum,”Vol. 710, pp 253-257, 2012.

3.      S. Pradeep, Sumit Kumar Sharma and Vivek Pancholi, “Influence of friction stir processing parameters on anisotropic behaviour of 5086-O aluminum alloy, Mater. Sci. Forum,”Vol. 702-703, pp 348-351, 2012.

4.      K. N. Ramesh., S. Pradeep and Vivek Pancholi, “Multipass friction stir processing and its effect on mechanical properties of aluminum alloy 5086, Metall. and Mater. Trans A,”Vol. 43, pp. 4311- 4319, 2012.

 

National Conference

1.      S.Pradeep, K.N.Ramesh and Vivek Pancholi, Effect of friction stir processing on mechanical properties and superplastic deformation behavior of 5086 Al alloy, National Conference on design and manufacturing (NaConDM2011), May 27-28,2011, held at IITM, Chennai.

International Conference

2.      S.Pradeep and Vivek Pancholi, Influence of single pass and multipass friction stir processing on the superplastic properties of 5086-O aluminium alloy,NMD-ATM 2010, 14-16th Nov 2010, IISC, Bangalore.

3.      S.Pradeep and Viovek pancholi, Microstructural and mechanical characterization of multipass friction processed Al-Mg alloy,2nd international conference on Manufacturing engineering and technology for Manufacturing Growth (METMG2014), Januart 20-21,2014, Miami, State of Florida, USA.

 

Amarendra.H.J

International Journal

1.      Amarendra H. J, G. P. Chaudhari, S.K. Nath, “Synergy of cavitation and slurry erosion in the slurry pot tester”, Wear, 290-291 (2012) 25-31.

2.      Amarendra. H. J, P. Kalhan, G.P. Chaudhari, S.K. Nath, S.Kumar, “Slurry erosion response of heat treated 13Cr-4Ni martensitic stainless steel”Materials Science Forum Vol. 710 (2012) pp 500-505. 

3.      Amarendra H. J, G.P. Chaudhari, S.K. Nath, “Cavitation and slurry erosion of aluminum in the slurry pot tester”,Materials Science Forum Vol. 736, pp 218-222, 2013.

4.      Kamlesh Joshi, Amarendra H. J, G. P. Chaudhari, S. K. Nath, “Effect of deposition parameters & Molybdenum percentage on Nickel-Molybdenum alloy coatings”, Advanced Materials Research, Vol. 585. pp 493-497, 2012.

5.      Vikash V., Amarendra H.J., “PLC Based Sensor Operated Obstacle Detection Carriage Vehicle”, International Journal of Applied Engineering Research, Vol.9, No.7, 2014.pp.847-851

 

National Conference

1.      Amarendra H. J,H. S. L. Singa Iyengar, “Design of Industrial Ventilation Systems –A Computer Aided Approach”, 3rd National Conference on Mechanical Engineering (NATCON.ME-2006), Page-87, Vol-2006, SIT, Tumkur ,26th  & 27th  May, 2006.

 

2.      Amarendra H. J., Pradeep Kalhan, G. P. Chaudhari, S. K. Nath, “Slurry erosion response of heat treated 13Cr-4Ni martensitic stainless steel”, 48th  National Metallurgists’ day celebration and 64th  Annual technical meeting held at Indian Institute of Science, Bangalore on Sunday, November 14th, 15th, & 16th  2010.

3.      Kamalesh,Amarendra H. J., Pradeep Kalhan, G. P. Chaudhari, S. K. Nath, “Nickel-molybdenum alloy coatings with pulse electro-deposition technique and its characterization”, (NTC-2011) National Tribology Conference 2011, 08 - 10 December 2011, Indian Institute of Technology Roorkee, Roorkee-247 667, India.

 

International Conference

1.      Amarendra H. J, “Slurry and cavitation erosion-conceptualization of a new test method” presented at the international conference” International Conference on Advances in Analytical Techniques and Characterization of Materials” July 5-7, 2011, RDCIS, SAIL, INDIA.

2.      Amarendra H. J, “Slurry erosion response of heat treated 13Cr-4Ni martensitic stainless steel”presented at the international conference on “Advances in Metallic Materials and Manufacturing Processes for Strategic Sectors (ICAMPS) January 19-21, 2012 held at Trivendrum, Kerala, INDIA.

3.      Amarendra H. J, “Combined Cavitation and particle erosion of brass”presented at TMS 2012, 141ST Annual Meeting and Exhibition, held at Orlando, Florida March 11-15, 2012. (Proceedings W-11, P-563, 2012).

4.      Amarendra H. J, “Combined cavitation and slurry erosion of 16Cr-5Ni martensitic stainless steels”,accepted for presentation, at TMS 2013, 142nd Annual Meeting and Exhibition, Henry B. Gonzalez Convention Center, San Antonio, Texas, March 3-7 2013.

 

K. R. Dushyanth Kumar

 

National conferences

1.      K. R. DushyanthKumar & K.Manjunath  “Modeling, Manufacturing Tool simulation for a light Air craft Bracket”National Conference on Advances in materials and manufacturing Processes at U.B.D.T, Davanagere on  5th & 6th October 2007.

2.    Dushyanth Kumar K.R “Rejection control of tyre tube valve threads through Advanced Manufacturing Techniques ” on Proceedings of National Symposium on Advances in Materials and Manufacturing Processes, 24-25April, 2010 at PSG Technology, Coimbatore, TN, India.

3.      K. R. DushyanthKumar & Dr.Gukan Rajaram  “Rejection control of tyre tube valve threads through advaced manufacturing Techniques”National symposium, at PSG college of Technology Coimbatore on NSPGS – 2010 on  24th & 25th April 2010.

 

Inter-National Journal

1.      Arpitha G R, Dhushyanth Kumar K.R, Dr. B.Yogesha, “Wireless communication in process automation”, in International Journal of Scientific and Engineering Research (IJSER). (ISSN 2229-5518), volume 3, issue 7, July 2012.

2.      Dushyanth Kumar K.R., Pradeep D.G., “ A data monitoring using Real time Environment”,  Int. Journal of Scientific and Engineering Research (IJSER), ISSN 2229 -5518), Vol.3, No.7. (July 2012)

3.      Dushyanth Kumar K.R., Anand. V. Shivashimpi., "Android based speech recognition control system for Domestic application”, International Journal of Research in ninformation technology(IJRIT), Vol.1, No.7, pp.133 -144, ISSN: 2001-5569, (July,2013).

4.      Dushyanth Kumar K.R., G.S.Shiva Shankar., Rajeshwar S. Kadadevaramath.,“Complete Evolution and Success Factors of Lean Manufacturing” International TMrfiat of Theoretical Research and Letters (IJTRL), Vol 3(2), pp.39-43, 2013.

5.      Dushyanth Kumar K.R., G.S.Shiva Shankar., R. S. Kadadevaramath., “Effective product Efficiency using advanced manufacturing Technology” Volume-7, Issue -2 , PP121-134, (2013)  Bisiness and system research      IJBSR

 

 

Inter-National conferences

1.      K. R. DushyanthKumar “Concurrent Engineering on metal forming” at the 5th International Conference on material processing for properties and performance (MP3), 11-15 December 2006, Singapore.

2.      K. R. DushyanthKumar “Achieving Productivity Goals Thought Quality Control Techniques”, at International Conference on  Advanced d materials, Manufacturing, Management and Thermal Sciences (AMMMT 2010), at  Siddaganga    Institute of Technology, Tumkur on 18th & 19th November, 2010.

3.      Dushyanth Kumar K.R, G.S.Shivashankar, Rajeshwar S. Kadadevaramath “An Overview of Lean Manufacturing and its Tools”on 54th National Convention & Indian Institution of Industrial Engineering & International conference on ‘Paradigms for global Challenges and Opportunities: Vision-2025’  29-31,Oct, 2012 at Nimhans Convention Center, Hosur road, Bangalore, Karnataka, India.

4.      Dushyanth Kumar K.R,  Arpitha G.R., “ Wireless communication in process automation ” on Proceedings of International conference on Engineering, Technology and Management (ICETM- 2012),Aug.29-Sept.1,2012 at Rajeev Gandhi college of Engineering and Technology, Pondicherry, Tamil Nadu.

5.       Dushyanth Kumar K.R ., Pradeep D.G.,‘Automated quality control system’ on Proceedings of International conference on ICT Culture in Education (ICTCE), 27-29, September, 2012 at India International center, New Delhi, India.

6.      Dushyanth Kumar K.R, G.S.Shivashankar, Rajeshwar S. Kadadevaramath ‘Improving Product Efficiency Using Lean Concepts with DOEs Techniques’ on Proceedings of international conference on ICAME 2013: International Conference on Automotive and Mechanical Engineering, June 05-06, 2013, World Academy of Science, Engineering and Technology (WASET-2013) at Avalon Hotel, New York, USA.

7.      Dushyanth Kumar K.R, G.S.Shivashankar, Rajeshwar S. Kadadevaramath ‘Lean supply chain strategies to Small and Medium Enterprises’ on Proceedings of 7th international conference on Applied business and economics (ICABE-2013), oct, 02-04, 2013at CUNY John jay college ,University of Newyork, Manhattan - New York, USA.

8.      Dushyanth Kumar K.R, G.S.Shivashankar, Rajeshwar S. Kadadevaramath “Application of Lean Concepts to supply chain management” : Review  (AMMMT 2013), at  Siddaganga    Institute of Technology, Tumkur on 3 & 4th May, 2013.

 

Vijayakumar G Tile

Inter-National Journal

1.      Vijaya kumar G Tile, Energy Analysis and IGCC Plant Technology to improve the efficiency and to reduce the Emission in Thermal Power Plant, IJRET, Volume No.03, Special Issue No.03,  page No.502-509, May 2014.

International Conference

1.      Vijaykumar G.Tile, Dr. U.S.Mallikarjun, Nagesha S.P,Raghavendra Rao R., “Numerical Analysis of Internal Combustion Engine for producer gas application with moving mesh approach using CFD”Proc. “International Conference on Innovations and Emerging Trends in Mechanical Engineering” (IIETME2014), organized by NAGARJUNA COLLEGE OF ENGINEERING & TECHNOLOGY, Bangalore, on June 13th 2014.

2.      Raghavendra Rao R., Dr. U.S.Mallikarjun, Nagesha S.P, Vijaykumar G.Tile, “Wall Temperature analysis of combustor for producer gas application using CFD” Proc. “International Conference on Innovations and Emerging Trends in Mechanical Engineering” (IIETME2014), organized by NAGARJUNA COLLEGE OF ENGINEERING & TECHNOLOGY, Bangalore, on June 13th 2014.

 

M.G.Vasundhara

Inter-National Journal

1.      Swathi S P, M G Vasundhara, Dr B Yogesh “ PLC based automatic liquid Racking System”International Journal of Engineering Research & Technology, vol 2 Issue 8 Aug 2013

2.      Roop R, M G Vasundhara, Dr K R Prakash “A low cost PLC based automatic liquid filling and sorting system”International Journal of Scientific and Engineering Research 2012

3.      Sanjay M R, Arpitha G R,Vasubdhara M.G., B Yogesha, “Study on Mechanical Characteristics of Unidirectional Sisal/Glass Fiber Reinforced Polyester Hybrid Composites ”, International Journal of Science and Research (IJSR), Volume 3 Issue 8, August 2014, ISSN: 585-588.

 

National Conference

1.      Vasundhara M G, Chetan S “Abrasive Wear Behaviors of Graphite Filled Unsaturated Polyester Glass Fiber Composite” Proc.Advance in Mechanical Engineering Don Bosco Institute of Technology  Bangalore  Mar 30th & Mar 31st 2009.

2.      Vasundhara M G, Chetan S “Comparative Study of Abrasive Wear Resistance of Mixture of Silicon carbide-Graphite Filled Glass Fiber Reinforced Polyester Composite” Proc. Recent Trend in Mechanical Engineering Vemana Institute of Technology Bangalore Nov 23th & 24th 2009.

International Conference

1.      Vasundhara M G, Chetan S, Satish S Nadig, Sudheer Kulkarni,  “Comparative study of abrasive behavior of silicon carbide Graphite filled unsaturated polyester glass fiber composite” Proc. International Conference Recent Trends in Materials and Characterization NITK Surthakal Feb 14th & 15th 2010.

2.      Chetan S, Satish S Nadig, Sudheer Kulkarni, Vasundhara M G “Comparative study of Abrasive wear resistance of silicon carbide Graphite and mixture of silicon carbide graphite filled glass fiber reinforced vinyl ester” Proc. International Conference Recent Trends in Materials and Characterization  NITK Surthakal  Feb 14th & 15th 2010.

3.      Satish S Nadig, Sudheer Kulkarni, Chetan S, Vasundhara M G “Comparative study of tensile behavior of silicon carbide Graphite and mixture of silicon carbide graphite filled glass fiber reinforced vinyl ester” Proc. International Conference Recent Trends in Materials and Characterization NITK Surthakal  Feb 14th & 15th 2010.

4.      Sudheer Kulkarni, Vasundhara M G, Chetan S, Satish S Nadig “Comparative study of flexural behavior of silicon carbide Graphite and mixture of silicon carbide graphite filled glass fiber reinforced vinyl ester” Proc. International Conference Recent Trends in Materials and Characterization NITK Surthakal  Feb 14th & 15th 2010.

5.      Roop R, M G Vasundhara, Dr K R Prakash “A low cost PLC based automatic liquid filling and sorting system” Proc. Punjab university   Oct 5th & 6th 2012

 

Shivashankar B. S.

International Journal

1.      Sharath H.K., Shivashankar B.S., Book Handling Robot for Libraries, International Journal of Engineering Research & Technology (IJERT), Vol. 2 Issue 8, August – 2013

2.      Raghavendra.K.M,  Shivshankar.B.S,Automating Inventory management Process,IJRIT International Journal of Research in Information Technology, Volume 1, Issue 7, July, 2013, Pg. 160-167

 

Raghavendra Rao R.

International Conference

1.      Raghavendra Rao R., Dr. U.S.Mallikarjun, Nagesha S.P, Vijaykumar G.Tile, “Wall Temperature analysis of combustor for producer gas application using CFD” Proc. “International Conference on Innovations and Emerging Trends in Mechanical Engineering” (IIETME2014), organized by NAGARJUNA COLLEGE OF ENGINEERING & TECHNOLOGY, Bangalore, on June 13th 2014.

2.      Vijaykumar G.Tile, Dr. U.S.Mallikarjun, Nagesha S.P,Raghavendra Rao R.  “Numerical Analysis of Internal Combustion Engine for producer gas application with moving mesh approach using CFD” Proc. “International Conference on Innovations and Emerging Trends in Mechanical Engineering” (IIETME2014), organized by NAGARJUNA COLLEGE OF ENGINEERING & TECHNOLOGY, Bangalore, on June 13th 2014.

 

Jeevan T.P.

 

International Journal

1.     

Jeevan T. P. & Divya H. V., “Finite element modeling for the stress, buckling and modal analysis of a cylindrical pressure vessel with torispherical enclosure” IJERT, Volume 2, Issue 6 (June- 2013)

2.     

Hareesha.M. & Jeevan T.P. , “Modification of Abrasive Wear Testing Machine and Testing of Materials” International Journal of Science and Research (IJSR) ISSN Volume 3, 10th October 2014.

National Conference

1.     

Anand A., Santosh K. , Jeevan T. P. &  Puneeth U. , “Determination of SIF for a crack emanating from a central hole in a rotating disc”, National Conference on Topical Transcend in Mechanical Technology 2013 (TTMT) SJBIT 2013 Bangalore.

2.     

Jeevan T.P., Dr. S.R.Jayaram, & Dr. Y.M.Shashidhara, “Statistical and Regression Analysis of Cutting Force and Surface Roughness under Vegetable Based Cutting Fluids on Turning AISI 304L”, Proceedings of National Tribology Conference (NTC-14), McGraw-Hill Education,2014, ISBN-10:1308421540

International Technical Paper / Journal Article

1.     

Darshan Bennur, Anand A. & Jeevan T.P., “Stress Analysis of 2D-Cylindrical Pressure Vessel with Torispherical Endclosure”Technical paper at SAE 2014 World Congress & Exhibition #:2014-01-0766    

 

Inter-National Journal

1.      Darshan Bennur, Anand A. & Jeevan T.P. , “Stress Analysis of 2D-Cylindrical Pressure Vessel with Torispherical Endclosure” Technical paper at SAE 2014 World Congress & Exhibition #:2014-01-0766     

 

2.      Jeevan T. P.& Divya H. V., “Finite element modeling for the stress, buckling and modal analysis of a cylindrical pressure vessel with torispherical enclosure” IJERT, Volume 2, Issue 6 (June- 2013)

 

National Conference

1.      Anand A., Santosh K. , Jeevan T. P. &  Puneeth U. , “Determination of SIF for a crack emanating from a central hole in a rotating disc”, National Conference on Topical Transcend in Mechanical Technology 2013 (TTMT) SJBIT 2013 Bangalore.

Sanjay M.R.

National Conference

1.      Sanjay M.R & Dr.Yogesha.B, “Study On Tensile Property Evaluation Of Jute – Glass Fibre Reinforced Polyester”, National conference on Advancement in materials Science (AMS 2014) Coimbatore Institute of Technology, Coimbatore, Tamil Nadu, India, Sept 26th & 27th 2014.

International Conference

1.      Sanjay M.R., Vinay S.S., T.Rangaswamy and N.K.S. Rajan, “CFD Simulation of Carburettor for low density fuels”, International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences (AMMMT 2013), 3rd-04th May 2013, SIT, Tumkur.

2.      Sanjay M R, B.Yogesha & N K S Rajan, “Experimental and CFD simulation of Producer Gas Carburetor” 2nd International Conference on Materials Mechanics and Management (IMMM-2014), 17-19 Dec 2014 at College of Engineering, Trivandrum, Kerala, India.

3.      Sanjay M R, “Study o Mechanical Properties of Natural- Glass Fiber Reinforced Polymer Hybrid Composite A review 2nd International Conference on Materials Processing and Characterization(ICMPC),  14th & 15th March 2015

4.      International Journal

1.      Sanjay M R, Arpitha G R, B Yogesha, “Investigation on Mechanical Property Evaluation of Jute - Glass Fiber Reinforced Polyester”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 4 Ver. July- August. 2013, pp50-57.

2.      Sanjay M R, Arpitha G R,Vasubdhara M G, B Yogesha, ”Study on Mechanical Characteristics of Unidirectional Sisal/Glass Fiber Reinforced Polyester Hybrid Composites ”, International Journal of Science and Research (IJSR), Volume 3 Issue 8, August 2014, ISSN: 585-588.

3.      Arpitha G R, Sanjay M R, L Laxmana Naik, B Yogesha, “Mechanical Properties of Epoxy Based Hybrid Composites Reinforced with Sisal/SIC/Glass Fibers” International Journal of Engineering Research and General Science (IJERGS), Volume 2, Issue 5, August-September,2014, ISSN: 2091-2730.

4.      Arpitha G R, Sanjay M R, B Yogesha,” REVIEW ON COMPARATIVE EVALUATION OF FIBER REINFORCED POLYMER MATRIX COMPOSITES” Advanced Engineering and Applied Sciences: An International Journal 2014; 4(4): 44-476,October 2014

Sharath H.K.

International Journal

1.      Sharath H.K., Shivashankar B.S., Book Handling Robot for Libraries, International Journal of Engineering Research & Technology (IJERT), Vol. 2 Issue 8, August – 2013

 

 

 

 

Copyright